讲座通知:Research and Development of diamond production for industrial use

  • in 学术科研
  • by 张震
  • 2017-09-11
  • 300


题目:Research and Development of diamond production for industrial use
报告人:山田英明博士
时间:2017年9月26日 上午10:00
地点:动力与机械学院报告厅
欢迎广大师生踊跃参加!


Abstract
Artificial diamond is being a very common material recently such as gem stones as well as
mechanical tools. This material has several superior material constants, especially for power
device applications. Based on the wider band gap, higher saturation carrier velocity, higher
thermal conductivity, and so on than those of Si, SiC, and GaN, diamond has been considered
to be the promising candidate material to realize higher performance power devices, which
can work even under harsh environment.
In addition, recent industrial interest is in its thermal conductivity, which is the highest in
the materials. Also, spintronics applications of diamond is one of the hottest topics of diamond
research, where specific defect-centers are expected to realize several kinds of sensors with
atomic level resolution even under room temperature.
For realization of above applications, it is indispensable to establish a way to produce diamond
wafers with reduced cost and improved quality. From the artificial diamond was firstly shown in '70s,
the commercialized size was not been remarkably changed until recently. In this 10 years, some
technical breakthroughs were achieved. In this presentation, current status and future prospect

of the diamond production is shown, which is followed by above mentioned several potential applications.



brief introduction
      Hideaki Yamada received his Phd dgree from Niigata University at 2002
for work on equilibrium and stability analysis of thermonuclear fusion plasmas.
Then, he worked for Kyoto University as a pos-doc until 2004.
The research topic in that period was fundamental study to understand mechanism
of plasma etching of organic polymers, which were candidate low-k materials in ICs.
From 2004, he started to work for AIST. The current interest is in efficient techniques
to produce inch size diamond wafers, and related plasma chemistry. He received the Prime
minister award 2017 for the work on diamond wafer.