个人基本信息

姓名：杨婷

职称：教授

电子邮箱：tingyang@whu.edu.cn

办公地址：湖北省武汉市武汉大学动力与机械学院A9420

教育经历

2011.09-2015.06 北京航空航天大学飞行器动力工程，工学学士

2015.12-2021.05 弗吉尼亚理工大学机械工程，工学博士

工作经历

2016.01-2022.01 弗吉尼亚理工大学机械工程，研究助理

2022.02-2024.05 麻省理工学院材料科学与工程，博士后

2024.06-今 武汉大学动力与机械学院，教授

研究方向

1）生物材料结构表征，力学分析

2）仿生材料设计

3）开发抗氢脆的储氢材料

曾获荣誉

2024年，国家海外高层次青年人才

2024年，湖北省百人计划

科研项目

主持科研项目

1) 生物矿化多孔材料的结构与力学性能，国家海外高层次青年人才项目，2024-2027，主持

代表论文

1. T. Yang, Zian Jia, Ziling Wu, Hongshun Chen, Zhifei Deng, Liuni Chen, Yunhui Zhu, and Ling Li. High strength and damage-tolerance in echinoderm stereom as a natural bicontinuous ceramic cellular solid. Nature communications (2022) 13(1) 1-12. (Q1， 6/74， IF=17.694)

2. T. Yang†, H. Chen†, Z. Jia, Z. Deng, L. Chen, E. M. Peterman, J. C. Weaver, and L. Li. A damage-tolerant, dual-scale, single-crystalline microlattice in nature. Science (2022) 375.6581, 647-652. (封面文章，Q1，2/74，IF= 63.832)

3. T. Yang†, Z. Jia†, Z. Deng, H. Chen, W. Liu, L. Chen, L. Li, Mechanical designs of the highly porous cuttlebone: A bioceramic hard buoyancy tank for cuttlefish. Proceedings of the National Academy of Sciences of the United States of America (2020) 117, 23450–23459. (PNAS "In This Issue" highlight，Q1，9/74，IF=12.779)

4. T. Yang†, Z. Wu†, H. Chen, Y. Zhu, L. Li, Quantitative 3D structural analysis of the cellular microstructures of sea urchin spines (I): Methodology. Acta Biomaterialia (2020) 107, 204-217. (Q1，13/98，IF=10.633)

5. E. Kanimba†, T. Yang†, S. T. Huxtable, L. Li, Z. Tian, Thermomechanical Analysis of a Bio-Inspired Lightweight Multifunctional Structure. Advanced Engineering Materials (2020) 2000371, 1–8. (后封面，Q2，146/345，IF=4.122)

6. M. Connors†, T. Yang†, A. Hosny, Z. Deng, F. Yazdandoost, H. Massaadi, D. Eernisse, R. Mirzaeifar, M. N. Dean, J. C. Weaver, C. Ortiz, L. Li, Bioinspired design of flexible armor based on chiton scales. Nature Communications (2019) 10(1), 1–13. (Q1， 6/74，IF=17.694)

7. Z. Wu†, T. Yang†, Z. Deng, B. Huang, H. Liu, Y. Wang, H. Lou, L. Li, Y. Zhu, Automatic crack detection and analysis for biological cellular materials in X-ray in-situ tomography measurement. Integrating Materials and Manufacturing Innovation (IMMI), (2019) 8(4), 559-569. (Q3，27/51，IF=3.551)

8. S. Mahmood Khan, Z. Deng, T. Yang, and L. Li, Bio‐Inspired Ceramic–Metal Composites Using Ceramic 3D Printing and Centrifugal Infiltration. Advanced Engineering Materials (2022) 24.4, 2101009. (Q2，146/345，IF=4.122)

9. Z. Jia, M. C. Fernandes, Z. Deng, T. Yang, Q. Zhang, A. Lethbridge, J. Yin, J-H Lee, L. Han, J. C. Weaver, K. Bertoldi, J. Aizenberg, M. Kolle, P. Vukusic, L. Li, Microstructural design for mechanical–optical multifunctionality in the exoskeleton of the flower beetle Torynorrhina flammea. Proceedings of the National Academy of Sciences of the United States of America (2021) 118, e2101017118. (Q1，9/74，IF=12.779)

10. Z. Deng, H. Chen, T. Yang, Z. Jia, J. C. Weaver, P. D. Shevchenko, F. D. Carlo, R. Mirzaeifar, L. Li, Strategies for simultaneous strengthening and toughening via nanoscopic intracrystalline defects in a biogenic ceramic. Nature Communications (2020) 11(1):1-11. (Q1， 6/74，IF=17.694)