一、个人基本信息

姓名：李成林 (LI CHENGLIN)

性别：男

出生年月：1984.12

职称：副研究员、硕士生导师

邮箱：lichenglin211@whu.edu.cn

二、学习及工作经历

工作经历

2019.05-至今，武汉大学动力与机械学院，特聘副研究员、副教授

2016.11-2019.03，韩国材料科学研究所，博士后

2015.02-2016.10，日本国立材料科学研究所，博士后

2013.07-2015.02，北京有色金属研究总院, 工程师

教育经历

2011.03-2013.02，韩国材料科学研究所，博士（联合培养）

2010.09-2013.07，北京有色金属研究总院，材料科学与工程，博士

2007.09-2010.07，北京有色金属研究总院，材料科学与工程，硕士

2003.09-2007.07，北京理工大学，材料科学与工程，学士

三、主要研究方向

3D打印

航空航天钛合金

先进医用金属

四、科研项目

1. 重点研发计划重点专项，2020-2021，子课题负责人

2. 国家重点实验室开放课题，2020-2021，课题负责人

3. 武汉大学科研启动经费，2019-2022

五、主要科研成果

1. Z.H. Chen, H.Y. Hui, C.L. Li*, F. Chen, X.M. Mei, Y. Ma, J.Y. Li, S.W. Choi, Q.S. Mei*, GNPs/Al nanocomposites with high strength and ductility and electrical conductivity fabricated by accumulative roll-compositing, Rare Met. (2021) .

2. C.L. Li*, C.S. Wang, P.L. Narayana, J.K. Hong*, S.W. Choi, J.H. Kim, S.W. Lee, C.H. Park, J.T. Yeom, Q.S. Mei, Formation of equiaxed grains in selective laser melted pure titanium during annealing, J. Mater. Res. Technol. 11 (2021) 301-311.

3. C.L. Li*, J.M. Oh, S.W. Choi, X.M. Mei, J.K. Hong, J.T. Yeom, Q.S. Mei, Z.T. Yu, C.H. Park*, Thermal stability of bimodal grain structure in a cobalt-based superalloy subjected to high-temperature exposure, Rare Met. 40(4) (2021) 877–884.

4. C.L. Li*, S.W. Choi, J.M. Oh, J.K. Hong, J.T. Yeom, J.H. Kang, Q.S. Mei, C.H. Park*, Bimodal grain structures and tensile properties of a biomedical Co–20Cr–15W–10Ni alloy with different pre-strains, Rare Met. 40(1) (2021) 20-30.封面

5. C.L. Li*, J.K. Hong*, P.L. Narayana, S.W. Choi, S.W. Lee, C.H. Park, J.T. Yeom, Q.S. Mei, Realizing superior ductility of selective laser melted Ti-6Al-4V through a multi-step heat treatment, Mater. Sci. Eng. A. 799 (2021) 140367.

6. C.L. Li*, J.M. Oh, S.W. Choi, J.K. Hong, J.T. Yeom, X.M. Mei, Q. Mei, Z. Yu, C.H. Park*, Study on microstructure and mechanical property of a biomedical Co-20Cr-15W-10Ni alloy during multi-pass thermomechanical processing, Mater. Sci. Eng. A. 785 (2020) 139388.

7. S.W. Choi, C.L. Li, J.W. Won, J.T. Yeom, Y.S. Choi*, J.K. Hong*, Deformation heterogeneity and its effect on recrystallization behavior in commercially pure titanium: Comparative study on initial microstructures, Mater. Sci. Eng. A. 764 (2019) 138211.

8. C.L. Li, J.W. Won*, S.W. Choi, J.H. Choe, S. Lee, C.H. Park, J.T. Yeom, J.K. Hong*, Simultaneous achievement of equiaxed grain structure and weak texture in pure titanium via selective laser melting and subsequent heat treatment, J. Alloys Compd. 803 (2019) 407–412.

9. P.L. Narayana^#, C.L. Li^#, S.W. Kim, S.E. Kim, A. Marquardt, C. Leyens, N.S. Reddy, J.T. Yeom, J.K. Hong*, High strength and ductility of electron beam melted β stabilized γ-TiAl alloy at 800°C, Mater. Sci. Eng. A. 756 (2019) 41–45.

10. C.L. Li, P.L. Narayana, N.S. Reddy, S.-W. Choi, J.T. Yeom, J.K. Hong, C.H. Park*, Modeling hot deformation behavior of low-cost Ti-2Al-9.2Mo-2Fe beta titanium alloy using a deep neural network, J. Mater. Sci. Technol. 35 (2019) 907–916.

11. C.L. Li, J.M. Oh, J.T. Yeom, C.H. Park*, Bimodal grain-structure formation in a Co–Cr-based superalloy during ultrahigh-homologous-temperature annealing without severe plastic deformation, J. Alloys Compd. 783 (2019) 173–178.

12. C.L. Li, C.H. Park*, S.W. Choi, S.W. Lee, J.K. Hong, J.T. Yeom, High strength and high ductility in the Co–20Cr–15W–10Ni alloy having a bimodal grain structure achieved by static recrystallization, Mater. Sci. Eng. A. 732 (2018) 70–77.

13. I. Gutierrez-urrutia*, C.L. Li, X. Ji, S. Emura, K. Tsuchiya, Quantitative analysis of {332}<113>twinning in a Ti-15Mo alloy by in situ scanning electron microscopy, Sci. Technol. Adv. Mater. 19 (2018) 474–483.

14. I. Gutierrez-Urrutia*, C.L. Li, K. Tsuchiya, {332}<113> detwinning in a multilayered bcc-Ti–10Mo–Fe alloy, J. Mater. Sci. 52 (2017) 7858–7867.

15. I. Gutierrez-Urrutia*, C.L. Li, S. Emura, X. Min, K. Tsuchiya, Study of {332}<113> twinning in a multilayered Ti-10Mo-xFe (x = 1–3) alloy by ECCI and EBSD, Sci. Technol. Adv. Mater. 17 (2016) 220–228.

16. C.L. Li, D.G. Lee*, X. Mi, W. Ye, S. Hui, Y. Lee, Effect of Al Addition on ω Precipitation and Age Hardening of Ti-Al-Mo-Fe Alloys, Metall. Mater. Trans. A. 47 (2016) 2454–2461.

17. C.L. Li*, X.J. Mi, W.J. Ye, S.X. Hui, D.G. Lee, Y.T. Lee, Microstructural evolution and age hardening behavior of a new metastable beta Ti–2Al–9.2Mo–2Fe alloy, Mater. Sci. Eng. A. 645 (2015) 225–231.

18. D.G. Lee, C.L. Li *, Y. Lee, X. Mi, W. Ye, Effect of temperature on grain growth kinetics of high strength Ti–2Al–9.2Mo–2Fe alloy, Thermochim. Acta. 586 (2014) 66–71.

19. C.L. Li, L.N. Zou, Y.Y. Fu, W.J. Ye, S.X. Hui, Effect of heat treatments on microstructure and property of a high strength/toughness Ti–8V–1.5Mo–2Fe–3Al alloy, Mater. Sci. Eng. A. 616 (2014) 207–213.

20. C.L. Li, D.G. Lee, X. Mi, W. Ye, S. Hui, Y. Lee, Phase transformation and age hardening behavior of new Ti–9.2Mo–2Fe alloy, J. Alloys Compd. 549 (2013) 152–157.

21. C.L. Li, X.J. Mi, W.J. Ye, S.X. Hui, D.G. Lee, Y.T. Lee, Influence of heat treatment on microstructure and tensile property of a new high strength beta alloy Ti–2Al–9.2Mo–2Fe, Mater. Sci. Eng. A. 580 (2013) 250–256.

22. C.L. Li, X.J. Mi, W.J. Ye, S.X. Hui, Y. Yu, W.Q. Wang, A study on the microstructures and tensile properties of new beta high strength titanium alloy, J. Alloys Compd. 550 (2013) 23–30.

23. C.L. Li, X.J. Mi, W.J. Ye, S.X. Hui, Y. Yu, W.Q. Wang, Effect of solution temperature on microstructures and tensile properties of high strength Ti–6Cr–5Mo–5V–4Al alloy, Mater. Sci. Eng. A. 578 (2013) 103–109.

六、学术兼职

1. SCI期刊编辑：Rare Metals, Frontiers in Materials

2. SCI期刊审稿人：Materials & Design，Journal of Alloys and Compounds，Materials Characterization，Advanced Engineering Materials， Journal of Materials Engineering and Performance